BTQZW - SODA ASH

  • MSDS: BTQZW
  • Manufacturer: E M SCIENCE
  • Product Name: SODA ASH
  • National Stock Number: 6850-01-105-4957
Product Identification

Product ID:SODA ASH
MSDS Date:12/10/1992
FSC:6850
NIIN:01-105-4957
MSDS Number: BTQZW

Responsible Party
E M SCIENCE
480 DEMOCRAT RD
GIBBSTOWN, NJ 08027
US

Emergency Phone: 800-424-9300

Info Phone: 609-354-9200

Cage: 0SK29

Contractor
E M SCIENCE DIV OF E M INDUSTRIES INC
70 GIBBSTOWN, NJ 08027 US

Telephone: 800-222-0342/609-423-6300

Cage: 63612

Ingredients

1)

CAS: 497-19-8

RTECS: VZ4050000

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:POSSIBLY HARMFUL IF SWALLOWED.
IRRITATING TO EYES, SKIN, RESPIRATORY TRACT; MAY CAUSE EYE BURNS.
INGESTION CAN SEVERELY DAMAGE MUCOUS MEMBRANES & CAUSE PAIN,
VOMITING, DIARRHEA & CIRCULATORY COLLAPSE. AVOID SIMULTANEOUS
PRESENCE OF SODA ASH & LIME DUST; THE COMBINATION IN THE PRESENCE
OF PERSPIRATION (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OR MOISTURE WILL CAUSE FORMATION OF
CORROSIVE CAUSTIC SODA. TESTS ON LABORATORY ANIMALS INDICATE
MATERIAL MAY PRODUCE ADVERSE REPRODUCTIVE EFFECTS.
Medical Cond Aggravated by Exposure:DATA NOT AVAILABLE.

First Aid

First Aid:GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE. SKIN:
IMMEDIATELY FLUSH THOROUGHLY WITH LARGE AMOUNTS OF WATER. EYES:
IMMEDIATELY FLUSH THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES.
INHALATION: REMOVE TO FRESH AIR; GIVE ARTIFICIAL RESPIRATION IF
BREATHING HAS STOPPED. INGESTION: DO NOT INDUCE VOMITING; IF
CONSCIOUS, GIVE WATER FREELY & GET MEDICAL ATTENTION.

Fire Fighting

Flash Point:NONCOMBUSTIBLE
Extinguishing Media:USE ANY SUITABLE FOR ADJACENT MATERIAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:EVAC AREA OF ALL UNNEC PERS. WEAR SUITABLE
PROT EQUIP. ELIM ANY IGNIT SOURCES UNTIL AREA DETERM FREE FROM
EXPLO/FIRE HAZ. CONTAIN RELS & ELIM ITS SOURCE IF THIS CAN BE DONE
W/OUT RISK. TAKE UP & CONTA INERIZE FOR PROPER DISP. COMPLY W/FED,
(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CNTNR TIGHTLY CLOSED. STORE IN
COOL, DRY, WELL-VENT AREA. STORE AWAY FROM MINERAL & ORGANIC ACIDS.
DO NOT GET IN EYES. AVOID SKIN CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:MATERIAL SHOULD BE HANDLED/TRANSFERRED IN AN APPROVED FUME
HOOD OR WITH ADEQUATE VENTILATION.
Protective Gloves:PROTECTIVE (NEOPRENE, PVC/EQUIVALENT).
Eye Protection:ANSI APPROVED SAFETY GLASSES W/(SUP DAT)
Other Protective Equipment:EYE WASH AND SAFETY EQUIPMENT WHICH MEET
ANSI DESIGN CRITERIA SHOULD BE READILY AVAILABLE .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT TAKE
INTERNALLY.
Supplemental Safety and Health
SPILL PROC:STATE & LOCAL REGULATIONS ON REPORTING RELEASES. EYE
PROTECTION: SIDE SHIELDS .

Chemical Properties

Boiling Pt:B.P. Text:DECOMPOSES
Melt/Freeze Pt:M.P/F.P Text:1564F,851C
Spec Gravity:2.53 (H*2O=1)
Solubility in Water:22%
Appearance and Odor:WHITE; GRANULAR OR POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, ALUMINUM, FLUORINE, PHOSPHORUS PENTOXIDE, SULFURIC ACID.
Stability Condition to Avoid:CONTACT WITH STRONG ACID MAY RESULT IN
VIOLENT REACTION. STARTS TO DECOMPOSE, LOSING CARBON DIOXIDE AT
400C.
Hazardous Decomposition Products:CARBON DIOXIDE, NA*2O.

Disposal

Waste Disposal Methods:MATL DOES NOT HAVE EPA WASTE NUMBER & IS NOT A
LISTED WASTE, HOWEVER CONSULTATION W/PERMITTED WASTE DISPOSAL SITE
(TSD) SHOULD BE ACCOMPLISHED. ALWAYS CNTCT PERMITTED WASTE DISPOSER
(TSD) TO ASSURE CO MPLIANCE W/ALL CURRENT LOCAL, STATE & FED REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.